Did know that a textured ceiling has started to become an increasingly popular way of decorating the ceiling of any room? Most of the people are well aware that such type of coverings for the ceiling is quite hard to repair and clean.

Like I have just mentioned that cleaning and repairing such types of ceiling can be quite difficult. Keep in mind that such type of ceiling is very hard to repair in the event that the ceiling has cracks or leaks because of the rough texture. Once you have successfully patched the crack in the ceiling, you would then need to match the texture. How inconvenient would that be, right?

Well, you do not need to worry about that anymore. Below is a step by step DIY guide that will tell you how to repair a textured ceiling in the most efficient and savvy way. On the other hand, if you are not comfortable in undertaking such a venture on your own, you are suggested to hire a company that provides professional services for ceiling texture repair in Hot Springs Village AR.

Step#1: Prepping For The Repair

Keep in mind that repairing and cleaning a textured ceiling can be a very messy job. This is the reasons as to why you must cover the floor using a laminated or dust sheet prior to doing anything with the ceiling.

However, if the texture of the ceiling is damaged, you’d have no option but to scrape it away with a scrapper.

Step#2: Sanding The Ceiling

You need to sand down the region around the damaged patches. Surely you have removed the damaged patches by now. But the sanding will ensure that the repair will securely stick to the existing ceiling.

Step#3: Filling the Gaps Of The Cracks

Now you need to put on drywall compound to the damaged regions of the ceiling by using a scraper. Then you need to make sure that you smooth down the compound using the scraper so that it is as flat as possible.

Remember that you need to let the compound thoroughly dry before you can do anything else, or else the compound can fall off the ceiling.

Step#4: Sanding The Compound Once It Has Dried

Once you have allowed the compound to dry, you’d then need to slightly sand down the area.

Make sure that you have sanded the surface of the drywall as smooth as possible.

Step#5: Getting Rid Of The Stains

Opting for Water Damage Ceiling Repair? At that point, you need to apply a layer of stain sealant to the repair. By doing this, you can have peace of mind that it will prevent the stains from coming through once again.

This will likewise avoid such issues brought about by the stains happening again as they seep through the roof.

Step#6: Re-Texturing The Ceiling

Use a spray surface repairing kit to repair the look of the texture of the ceiling. As a matter of fact, there are a lot of various repairing kits available which suit different types of finishes.

There are popcorn, splatter and orange strip texture repairing kits available.

Step#7: Repainting The Ceiling

You need now to choose the right color for your ceiling. Then you need to repaint the ceiling by using the paint with the aim that the repaired area is blended into the rest of the roof.

By doing this, you can breathe a sigh of relief as the repair will be pretty much unnoticeable.

Step#8: Cleaning Up The Mess

After you have completed the repairing venture you would now be able to remove the laminated or dust sheet. It is crucial that you do this cautiously to keep away from any opportunity to paint falling onto your floor or anyplace else.