Flagstone is one material that you can confidently choose for your patio if you really want to give it a natural feel. If you have already said no to those boring paver blocks and preferred installing flagstone in your backyard, rest assured that it is going to give an entirely refreshing look to it. When it comes to durability, there is no doubt that you will hardly need to repair your flagstone paving, but if you do, take help from this guide.

Thankfully, it is easy to restore flagstone to its original state. In fact, this is the case with all types of paving stones that you can easily go for their refinishing. It is not entirely an easy procedure to refinish flagstone, but you can surely learn it.

Clean It With Vinegar & Water

Cleaning is indeed the first step when you want to restore your paving. For cleaning, you must prepare a solution of water and vinegar. With the help of this solution, you can easily remove all the mineral deposits from your weathered flagstone. It acts as a mild acid but you need to leave the solution on the floor for several minutes to get the best results. If applied properly, it surely helps you get the desired results in most situations and you don’t have to go for coating removal on the stone in Phoenix AZ. Removing coating and then applying a new coating is really a lengthy procedure. So it is always best to go for deep cleaning first.

Use A Pressure Washer

A pressure washer is also a good way to remove dirt, grime and other buildups from your paving. It is because of the extensive foot traffic that you feel like your paving is weathered. A good pressure wash can often get you good results. Fill your pressure water jet with normal water and then spray it with the nozzle to remove all the buildup and remove the natural stone beneath.

Use A Heavy-Duty Coating Stripper

To soften the old sealer, you can use a heavy-duty coating stripper with the help of a paintbrush. All you have to do is just leave it for 20 minutes or more. It may take nearly two hours for the complete softening of the old sealer but you just keep on checking for after every 20 minutes. Once it is softened, you can scrub the old sealer and wash it away with the water. Make sure that you have cleared all the grout lines and stone crevices.

Use A Stone Penetrating Sealer

Sealing is the last and most important step when you are planning sandstone stripping and refinishing in Phoenix AZ. You need to apply a stone-penetrating sealer to the flagstone and to apply the sealer you can use a paintbrush or paint roller. For the best results, it is always recommended to follow the instructions given by manufacturers. Let it dry completely and if there is still a need, go for another coat.

Final Thoughts!

In all the recent paving projects, we have observed that sandstone pavers have become the most popular materials. These are versatile, easy to install and durable. To keep yourself free from the hassle of going for an instant repair, it is always better to protect them from scratches. Also, make sure that there is less water spilling on your sandstone pavers because they have high water absorption. This high absorption rate of water makes this material more vulnerable to damage. If you are thinking about installing sandstone in your home, do not ever use it in the bathroom or kitchen. Your patio is the best place where you can make effective use of this stone. It stays longer there and you will not need refinishing anytime soon.